0% Complete
صفحه اصلی
/
The 5th International Conference on Electrical Machines and Drives
A Novel Hybrid V- and Spoke-type PM Magnetic Gear
نویسندگان :
Mojtaba Malakooti Khaledi
1
Seyed Ahmadreza Afsari Kashani
2
1- University of Kashan
2- University of Kashan
کلمات کلیدی :
Magnetic gear،genetic optimization algorithm،rare-earth magnet،finite element analysis،cogging torque،torque density
چکیده :
Magnetic gears (MGs) do not need to undergo routine maintenance in terms of cooling and lubrication, in contrast to typical mechanical gears. However, they do have certain restrictions, such as low torque density and high cogging torque. A coaxial magnetic gear is suggested in this study in order to simultaneously achieve the lowest cogging torque, the maximum torque density, and the lowest consumption of magnetic material. The proposed structure was optimized using a genetic optimization algorithm, and its magnetic and mechanical performances were evaluated using ANSYS Maxwell 2021-R1 and ANSYS Workbench 2021-R1 finite element software. A comprehensive comparison of the proposed structure with the conventional optimal structure shows the superiority of the proposed structure.
لیست مقالات
لیست مقالات بایگانی شده
Influence of Tooth Shoe Geometry on the Accuracy of Variable Reluctance Resolvers
Mahdi Sadeghi Nazarabadi - Farid Tootoonchian
Design and Optimization of the Rotor Configuration of a PM-assisted Synchronous Reluctance Machine
Amir hosein Amiri - Seyed Ehsan Abdolahi - Saeed Hasanzadeh
Common Mode Voltage Reduction in PMSM Drives Using Model Predictive Control
Javad Amini - Reza Roshanfekr
Control of a Modular Drive for a Six-Phase Non-Sinusoidal PMSM with Asymmetric Open-End Winding Using the Reference Current Shaping Strategy
Abolfazl Halvaei Niasar
A New Method for Fast and Accurate Calculation of Saturation Curves for Large Synchronous Generators
Farshad Kiani - Hamed Tahanian
An Impedance-Source Dual Bridge Converter
Taher Hemmati - Hossein Torkaman - Soheyl Khosrogorji - Milad Babalou
Sensorless Drive of SynRM using Sliding Mode Observer based on Maximum Torque per Ampere Control Approach
Hadi Ghorbani - Roozbeh Asad - Farzad Bodaghi
Multiphysics Analysis of Stator and Frame in a Medium-power Induction motor
Behzad Bahrami Joo - Mohsen Nikfar
A New Single-Phase Integrated Battery Charger for Electric Vehicles Using Open-Winding PMSM Drive and Applying Model Predictive Control
Mohammadjavad Golalipour - Mahdi S. Mousavi - S. Alireza Davari - Mokhtar Aly - Freddy Flores-Bahamonde - Jose Rodriguez
Electromagnetic Design of an Axial-Flux Dual- Stator Switched Reluctance Motor for High-Torque Variable-Speed Applications
Moslem Geravandi - Hassan Moradi - Mohammad Sedigh Toulabi
بیشتر
ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 44.5.0