کنفرانس بین المللی ماشین و محرکه های الکتریکی

لطفا منتظر بمانید ...

صفحه اصلی / The 5th International Conference on Electrical Machines and Drives

A delta-shape combined pole interior permanent magnet motor with lower permanent magnet cost

نویسندگان :

Amir Mahdi Dashtizadeh¹ Babak Ganji²

1- University of Kashan 2- University of Kashan

کلمات کلیدی :

interior permanent magnet motor،delta-shape،PM cost،optimization،DOE،FEM

چکیده :

The delta-shape interior permanent magnet motor is a well-known type of permanent magnet (PM) motors that is used in many industrial applications. Usually, the same material is selected for all PMs. In the present paper, a new structure is proposed for this motor in which a combination of rare-earth magnet and ferrite magnet is used to form the delta-shape pole. Using the simulation results derived from finite element method (FEM), it is shown that the PM cost is reduced significantly in the suggested structure while the average torque is reduced slightly. Based on the design of experiments (DOE) method, the optimization of the suggested design is also done to maximize average torque and minimize the torque ripple.

لیست مقالات

لیست مقالات بایگانی شده

توسعه نرم‌افزار محاسبه سختی یاتاقان‌های غلتشی

سمیرا کاویانی - زهره محمدی - علی قاهری

Investigation of Low-temperature Ethylene Production of Transformer Oil Using New IEC Method

Nima Ajodani-Zanjani - Hossein Karami - Gevork B.Gharehpetian - Arash R. Khoshrou

Determination of the Permissible Range for Surface Resistance of the Outer Corona Protection Systems in High Voltage Electric Machines

Hamed Tahanian - Zeinab Sadat Sheikholeslami - Moein Farhadian - AmirAbbas Vahaj - Farshad Kiani

CNN-Based Location Detection of Static Eccentricity in 5-X Resolver

Mahdi Emadaleslami - Farid Tootoonchian

Deep CNN-Based Method for Detecting Mechanical and Rotor Bar Faults in Induction Motors

Seyedjavad Mirmohammad Meiguni - Abolfazl Vahedi - Akbar Rahide

On the effect of control parameter variations and PLL dynamics on low-order harmonics in single phase grid-connected inverters in the presence of grid impedance uncertainty

Seyed mohammad ebrahim Mirjebreili - Sadegh Mohsenzade

3D FE modeling and calculation of electromagnetic torque and eddy current loss in the end region of large synchronous generators

Moein Farhadian - Farshad KIANI - AmirAbbas Vahaj - Hamed Tahanian

A LCC-LCC Converter with Near Constant Output Voltage for Autonomous Underwater Vehicles

Ahmad Siroos - Ebrahim Afjei - Xiaodong Liang - Alireza Sheikhi Fini

A Brief Review of Design and Optimization Methods in Performance Improvement of SynRMs

Amirhassan Mirzaei - Mansoor Rafiee

An Improved Active Feedforward Compensation Based on Model Predictive Control for Electrical Test Bench

Alireza Khalaj - Abolfazl Vahedi - Hossein Azizi-Moghaddam

بیشتر

ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 44.8.1