کنفرانس بین المللی ماشین و محرکه های الکتریکی

لطفا منتظر بمانید ...

صفحه اصلی / The 3rd International Conference on Electrical Machines and Drives

A New Method for Torque Optimization of a BLDC Motor Based on Commutation Ripple

نویسندگان :

Reza Farajidavar¹ Ali Ghaffarpour² Mojtaba Mirsalim³

1- Amirkabir University of Techonlogy 2- Amirkabir University of Techonlogy 3- Amirkabir University of Techonlogy

کلمات کلیدی :

Spoke-Type BLDC Motor،torque optimization،finite element method،submersible pump،variable speed fan drives

چکیده :

High efficiency and ease of speed control make BLDC a suitable choice for fans and pumps. Cogging torque reduction and airgap flux density increase were the common objectives in motor design to achieve a reasonable torque profile. Commutation torque ripple is a major factor in torque ripple, and significant error is caused by ignoring it. A design method is suggested in this paper that considers the effect of non-ideal back EMF in torque calculation. After discussing the commutation point, electric loading based on current density and motor dimensions, torque optimization is done by Ansys FEM software. A procedure for determining the coil turn number that ensures matching between the motor operating point and power supply is also suggested. Detailed dynamic simulation is done to validate the proposed procedure.

لیست مقالات

لیست مقالات بایگانی شده

Dynamic Energy Management for EV-Integrated Grids Using Reinforcement Learning

Mahnaz Izadi - Behnam Zaker - Saeed Izadi

Comparative Accuracy of IEC Ratio Approaches and Duval Triangle/Pentagon in Transformer Fault Diagnosis from DGA Data

Fateme Aliyari - Mohammad Hamed Samimi - Majid Sanaye-Pasand

طراحی یک موتور آهنربای دائم سنکرون برای کاهش ریپل گشتاور جهت استفاده در خودروهای الکتریکی

محمدرضا کوهستانی - عباس شیری

Study of a New Outer Rotor Permanent Magnet motor with Flux-Switching effect

Mehrad Haseli - Mohammad Reza Sarshar - Mojtaba Mirsalim - Seyed Hamid Montazeri

Torque Profile Enhancement in a Coaxial Magnetic Gear by Modification Shape of Flux Modulator

Alireza Jaferian-Fini - Alireza Sohrabzadeh - Hossein Torkaman - Hamid Ebrahimi

Multiple Partial Discharges Detection and Localization in Air-Insulated Substations_ Part 1 – UHF Sensor Array Design, Simulation Environment, and a Novel Clustering Framework

Morteza Bagheri - Asghar Akbari - Hamid Jahangir

Assessment of the Strength and Fatigue Behaviour of Generator Rotor Fan Blades under Static and Cyclic Loading

Alireza Shamaei-Kashani - Meysam Davoudabadi

A Numerical Method for Prediction of Standard Partial Discharge Test Performance of An Open-Ventilated Dry-Type Transformer at Design Stage

Mohammad Qumi - Mahdi Kazemiun - Mehdi Vakilian

A Comparison study of Offline Stator Resistance Estimation Methods Based on Signal Injection via Voltage Source Inverter

Mohsen Zeynali - Ali Mosallanejad - Hamidreza Pairodin nabi

تحلیل عیب ناهم محوری از نوع ترکیبی در ماشین شارمحوری آهنربای دائم بدون هسته

فاطمه اسلامی - مصطفی شاه نظری

بیشتر

ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 44.8.1