کنفرانس بین المللی ماشین و محرکه های الکتریکی

لطفا منتظر بمانید ...

صفحه اصلی / The 5th International Conference on Electrical Machines and Drives

Acoustic Noise Estimation of Air-Core Reactors Using the Finite Element Method

نویسندگان :

Alireza Khodadad¹ Mohammad Hamed Samimi²

1- university of tehran 2- university of tehran

کلمات کلیدی :

Air–core reactor،acoustic noise،COMSOL Multiphysics،vibro–acoustics،Lorentz force،FEM

چکیده :

As urban development approaches electrical substations, predicting and controlling noise from high-power equipment becomes increasingly important. This paper presents a comprehensive procedure to predict acoustic noise from a large air-core reactor using a finite element model (FEM) implemented in COMSOL Multiphysics. Noise in air-core reactors is driven by Lorentz forces acting directly on the windings. A one-way coupling was used: a Magnetic Field study calculated the volumetric force density, which was then applied in Solid Mechanics to compute structural vibration; the vibrating surfaces were linked to an Acoustic Pressure study to obtain the sound pressure level (SPL) spectrum. Numerical predictions were compared with measurements from an operating reactor. This validated FEM approach provides a crucial, non-intrusive design tool for optimizing winding configurations and noise mitigation strategies.

لیست مقالات

لیست مقالات بایگانی شده

Generalized Spectral Approach of Magnetic Field Prediction and Slotting Effect Modeling

Mohammad Hosein Javanmardi - Akbar Rahideh

Impact of Tap Changer Configurations on Short-Circuit Inductance of a Transformer: An Analytical Approach

Mahsa Taghilou - Mojtaba Mirsalim

Analysis of the Cause of Abnormal Stator Winding Temperature Rise in a Gas Generator Using Log Data

Reza Khanlari - Fateh Vakili Mafakheri - Mehrdad Hamidian

Strength analysis of the bushing system supporting set for a medium power turbo-generator using the multiphysics method

Saeed Rostami - Peyman Shoreshi - Mohsen Nikfar

Vibrational Analysis and Optimization of the Stator End-Winding Support System for a Medium-Power Turbo-Generator with Enhanced Roping Configuration

Rouzbeh Nouhi Hefzabad - Mojtaba Dehghani - Peyman Shoreshi - Mohsen Nikfar

Investigation of Three-Phase Tertiary Winding for Integrated Self-Excitation in Dump Trucks

Mohammad Sarvi-Maraghi - Omid Khanzadeh - Abolfazl Vahedi - Mahdi Abolghasemi

Condition Monitoring of Induction Motors using Fiber Bragg Grating Sensors

Mehdi Dashti - Jawad Faiz - Ghasem Rezazadeh - Mohammad Hamed Samimi

Analysis of Short-Circuit Fault Types in Switched Reluctance Generators for Low-Power Wind Turbine Applications

Emad Mirzaei - Hossein Torkaman - Milad Babalou

Impact of Bridge and Linear De-Energized Tap Changer on Transformer Short-Circuit Impedance: An Analytical Approach

Mahsa Taghilou - Mojtaba Mirsalim

Study of a Modular Consequent-Pole Flux Reversal Motor with the Synergy of Biased-Flux Effect

Mohammad Reza Sarshar - Mohammad Afrank - Mohammad Amin Jalali Kondelaji - Mojtaba Mirsalim - Javad Shokrollahi Moghani

بیشتر

ثمین همایش، سامانه مدیریت همایش ها و جشنواره ها - نگارش 44.11.0