0% Complete
صفحه اصلی
/
The 3rd International Conference on Electrical Machines and Drives
A Dual Function Protection System Based on Fault Current Limiter and Circuit Breaker for DFIG
نویسندگان :
Morteza Hesami
1
Mehdi Bigdeli
2
Kumars Rouzbehi
3
Mehdi Firouzi
4
Nima Shafaghatian
5
1- دانشگاه آزاد اسلامی واحد زنجان
2- Department of Electrical Engineering Islamic Azad University zanjan branch Zanjan, Iran
3- Departamento de Ingeniería de Sistemas y Automática Universidad de Sevilla, Sevilla, España
4- Department of Electrical Engineering Islamic Azad University Abhar branch Abhar, Zanjan, Iran
5- Department of Electrical Engineering Zanjan University Zanjan, Iran
کلمات کلیدی :
DFIG،FCL،HCB،DFIG Protection system
چکیده :
The rapid increase in fault currents and the susceptibility of power converters in doubly-fed induction generators (DFIGs) to short-circuit faults pose significant challenges in terms of protection. Short-circuit faults can disrupt the normal operation of DFIGs, leading to electrical fires, equipment failures, and other critical issues. Therefore, it is imperative to employ an effective method to mitigate or prevent such occurrences. This study introduces a hybrid circuit breaker (HCB) designed to provide rapid and secure protection for the DFIG system and the grid. The HCB operates in two distinct modes: firstly, as a fault current limiter (FCL) and secondly, as a circuit breaker. The functionality of this proposed HCB is subjected to rigorous mathematical analysis, and simulation results validate the findings from the analytical studies, confirming the high performance of the HCB in safeguarding the DFIG system and grid.
لیست مقالات
لیست مقالات بایگانی شده
طراحی و شبیه سازی یک موتور سنکرون رلوکتانسی در کلاس بازدهی IE4
محمد آبشاری - منصور رفیعی
Vibrational Analysis and Optimization of the Stator End-Winding Support System for a Medium-Power Turbo-Generator with Enhanced Roping Configuration
Rouzbeh Nouhi Hefzabad - Mojtaba Dehghani - Peyman Shoreshi - Mohsen Nikfar
Neural Network-Based Prediction of AC Losses and Performance in High-Speed PMSM with Hairpin Winding
Mohammad Sepehr Zamani - Aghil Ghaheri - Ebrahim Afjei
Design, Modeling, Fabrication, and Analysis of a Double-Input Single-Output Direct DC/AC Converter for Hybrid PV–Battery Systems
Soheil Khosrogorji - Hossein Torkaman - Hao Chen
A Comparision Between PID-PSO and Fuzzy-PID Controllers for Controlling a DC Motor Fed with a Buck-Boost Converter with Continuous Input Current and Semi-Quadric Voltage Gain
Nasim Moradmatak - Seyed Hamid Shahalami
A New Star-Type Rotor Topology In Radial Flux Magnetic Gear
Mojtaba Malakooti Khaledi - Seyed Ahmadreza Afsari Kashani - Mostafa Madanchi Zaj
Use of Embedded Permanent Magnets in the Design and Analysis of Switched Reluctance Motors for Torque Optimization
Matin Rahimi - Seyed Hamid Shahalami - Esmaeil Fallah Choolabi
Novel Single-phase five-level current source CHB protection topology with SIC switches for induction motor
Amirhossein Ramezankhani - Amir Masoud Nouki - Farzad Bodaghi - Mohammadreza Arabshahi - Sobhan Mohammadian - Davood Arab Khaburi
استاندارد IEC60422-2024 و تغییرات ایجاد شده
مهدی بیگدلی بیگدلی - سیدعمیدالدین موسوی
حفاظت ترنسفورماتور قدرت با استفاده از یک رله تفاضلی تطبیقی چند-ناحیهای
حسین حاجیان - سجاد توحیدی
بیشتر
ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 43.6.0