لطفا منتظر بمانید ...
0% Complete
صفحه اصلی
/
The 4th International Conference on Electrical Machines and Drives
A Comparative Analysis of Two Different Types of Permanent Magnet Motors with Outer-Rotor Structure for Direct Drive Applications
نویسندگان :
Amir Ebrahimi Shohani
1
Mohammad Ardebili
2
Karim Abbaszadeh
3
1- دانشگاه صنعتی خواجه نصیرالدین طوسی
2- دانشگاه صنعتی خواجه نصیرالدین طوسی
3- دانشگاه صنعتی خواجه نصیرالدین طوسی
کلمات کلیدی :
flux switching machines،vernier machines،outer rotor،permanent magnet،direct drive applications
چکیده :
Abstract—In this paper, an electromagnetic performance comparison is conducted between an outer-rotor flux-switching permanent magnet motor (FSPM) and an outer-rotor permanent magnet vernier motor (PMV) for direct drive systems. Both motors employ the same stator and rotor pole pairs, an identical double-layer concentrated winding, and have almost the same volume of PMs and steel laminations. Also, the configuration and main principles are clarified. Then, a comparative analysis of both motors is presented using 2-D finite element analysis (FEA). According to the results, in terms of cogging torque, the PM vernier motor performs better than the FSPM motor, while in terms of back-EMF, output torque, torque ripple, total loss, and efficiency, the FSPM motor shows better performance.
لیست مقالات
لیست مقالات بایگانی شده
ماشین مغناطیس دائم با کلیدزنی شار و استاتور کاهش یافته بدون یوغ
سیدرضا موسوی اقدم - میلاد بایرامی پیراقوم
Electromagnetic Sensor Behavior Prediction Using LSTM Neural Network for Enhanced Accuracy and Reliable Performance
Ahmad Saasni - Mehrdad Ghafari - Mostafa Eftekharizadeh
Multiple Partial Discharges Detection and Localization in Air-Insulated Substations: Part 2 – Localization Algorithm, Results Analysis, and Impact of Multi-Path Propagation
Morteza Bagheri - Asghar Akbari - Hamid Jahangir
Comparative Accuracy of IEC Ratio Approaches and Duval Triangle/Pentagon in Transformer Fault Diagnosis from DGA Data
Fateme Aliyari - Mohammad Hamed Samimi - Majid Sanaye-Pasand
Rotor Topology Modification for Torque Enhancement in Synchronous Reluctance Motors via GA-Driven Parametric Optimization
Amirhassan Mirzaei - Mansour Rafiee
An Integrated Design and Simulation Framework for Hybrid Electric Vehicle: A Case Study on the Logan Vehicle Platform
AmirHossein Azad - David Flynn
On the effect of control parameter variations and PLL dynamics on low-order harmonics in single phase grid-connected inverters in the presence of grid impedance uncertainty
Seyed mohammad ebrahim Mirjebreili - Sadegh Mohsenzade
Condition Monitoring of Induction Motors using Fiber Bragg Grating Sensors
Mehdi Dashti - Jawad Faiz - Ghasem Rezazadeh - Mohammad Hamed Samimi
Multi-Objective Design Optimization of a Flux-Switching Permanent Magnet Motor: A Comparative Study of Metaheuristic Algorithms
Tohid Sharifi - Ali Jamali-Fard - Hossein Azizi Moghaddam
End Winding Eddy Current Loss Calculation of Large Synchronous Generators Considering Circulating Currents
Moein Farhadian - Fazel Pourmirzaei Deylami - Hamed Tahanian
بیشتر
ثمین همایش، سامانه مدیریت همایش ها و جشنواره ها - نگارش 44.11.0