لطفا منتظر بمانید ...
0% Complete
صفحه اصلی
/
The 5th International Conference on Electrical Machines and Drives
Fault-Tolerant Control of Three-Phase Induction Motor Based on Predictive Feedforward Method
نویسندگان :
S. Alireza Davari
1
Mahdi S. Mousavi
2
Amir Hosein Valiloo
3
Freddy Flores
4
Majid Rahmani
5
Yuzhe Zhang
6
Zhenbin Zhang
7
Jose Rodriguez
8
1- Shahid Rajaee Teacher Training University
2- Faculty of Engineering, Universidad San Sebastian, Santiago, Chile
3- Shahid Rajaee Teacher Training University
4- Engineering Faculty, Universidad Andres Bello, Santiago, Chile
5- Shahid Rajaee Teacher Training University
6- Shandong University
7- Shandong University
8- Faculty of Engineering, Universidad San Sebastian, Santiago, Chile
کلمات کلیدی :
Fault-tolerant drive,،model- free predictive control،induction motor,
چکیده :
This research proposes a fault-tolerant control of three-phase induction motors with one phase cut out, focusing on predictive feedforward control. The paper aimed to maintain stability and robustness. Identifying zero sequence circuit models for post-fault performance is a challenge in the case of fault-tolerant drives. This research proposes a model-free feed-forward predictive control. The midpoint of the DC-link is connected to the null point of the induction motor. Simulation results evaluate the proposed method. The results demonstrated a stable performance in both steady state and transient conditions. Also, the motor does not need system identification, and it shows a robust performance in different conditions.
لیست مقالات
لیست مقالات بایگانی شده
A Fast Analytical Method for No-Load Air Gap Flux Density and Voltage Estimation in Large Synchronous Generators
Farshad Kiani - Hamed Tahanian
Winding Selection For Wound-Rotor PCB Resolver
Saeed Hajmohammadi - Zahra Nasiri Gheidari
Mechanical Design of Shafts for Axially-Segmented-Rotor PM Motors
Amin Nobahari - Abolfazl Vahedi
A delta-shape combined pole interior permanent magnet motor with lower permanent magnet cost
Amir Mahdi Dashtizadeh - Babak Ganji
Technical and Economic Feasibility Study of Using Fractional Slot Concentrated Winding BLDC Motor for Evaporative Cooler Application
Hossein Azizi moghaddam - Reza Mirzahosseini - Amirhossein Farajzadeh
Frequency Control in the Presence of Dynamic Model of Induction Motor Based on Virtual Inertia
Akbar Karimipouya - Amir GHezelbashan - Saeid Shahmoradi
Performance Comparison of Predictive Functional Speed Controller Based on Extended State and Sliding Mode Disturbance Observers
Ahmadreza Karami-Shahnani - Mohammad Shokrani - Karim Abbaszadeh - Reza Nasiri-Zarandi
استاندارد IEC60422-2024 و تغییرات ایجاد شده
مهدی بیگدلی بیگدلی - سیدعمیدالدین موسوی
Reliability and Lifetime Analysis on Permanent Magnet Motors in Elevator: Case Study PMA-SynRM & IPMSM
Ali Amini - MohammadSadegh KhajueeZadeh - Abolfazl Vahedi
بررسی گشتاور ژنراتور سنکرون در شرایط خطای همگامسازی خارج از فاز
امید برفی - علیرضا سبوحی - ابوالفضل واحدی
بیشتر
ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 44.8.1