کنفرانس بین المللی ماشین و محرکه های الکتریکی

صفحه اصلی / The 4th International Conference on Electrical Machines and Drives

A New Hybrid Y-Type Rotor Topology for High-Performance Coaxial Magnetic Gear

نویسندگان :

Mojtaba Malakooti Khaledi¹ Seyed Ahmadreza Afsari Kashani²

1- University of Kashan 2- University of Kashan

کلمات کلیدی :

Coaxial magnetic gear،torque density،ferrite،rare earth magnet،finite element analysis،genetic algorithm

چکیده :

In recent years, magnetic gears (MGs) have seen unprecedented development and numerous novel designs have been proposed because of their contactless characteristic and low noise and vibration. Yet, the expense of using magnetic gears may be a deterrent in small-scale industrial applications. The extensive usage of pricey neodymium or samarium cobalt magnets is the main cause of the high cost of magnetic gears. In low-frequency applications, ferrite permanent magnets present minimal eddy current losses and are affordable and widely accessible. Compared to most modern magnets, ferrite has a substantially lower energy (BHmax). Using two different kinds of magnets at the same time is an effective technique to obtain high energy and reduce costs. This paper presents the analysis of a coaxial magnetic gear that simultaneously employs rare-earth and ferrite magnets in its structure. The proposed structure is optimized by ANSYS Maxwell 2021-R1 finite element software and genetic algorithm.

لیست مقالات

لیست مقالات بایگانی شده

The Influence of Core Geometry and Air Gaps on Magnetic Characteristics and Inductance of Dry-Type Series Reactor

Davood Azizian - Shohreh Saberi

An Active Current Balancing Method for Multiphase LLC Resonant Converter

Seyedamirhossein Talebi - Kioumars Shahriari - Salar Sadeghian - Reza Takarli - Seyed Fariborz Zarei

Technical and Economic Feasibility Study of Using Fractional Slot Concentrated Winding BLDC Motor for Evaporative Cooler Application

Hossein Azizi moghaddam - Reza Mirzahosseini - Amirhossein Farajzadeh

A New Method for Fast and Accurate Calculation of Saturation Curves for Large Synchronous Generators

Farshad Kiani - Hamed Tahanian

Fatigue crack growth analysis in generator shafts

Pouyan Shahabi - Arsalan Ajdani - Meysam Davoudabadi

Design Considerations and Comparison of High-Speed Permanent-Magnet Motors for Flywheel Energy Storage Systems

Fariba Farrokh - Mohammed Jamal Mohammed - Ali Jafer Mahdi - Mohammad Farahzadi - Karim Abbaszadeh

Study of Flux Switching Machine Rotors from EMF Harmonic Components Point of View for Direct Drive wind power Application and Design of a new Topology with Double Rotor & Toroidal Coil

Rouhollah Rouhani - Alireza Rouhani

A Comprehensive Review on Advancements in Additive Manufacturing for Active Parts of Electrical Machines

Aryan Khazaei - Mohsen Arabkhazaeli - Hamidreza Dalirnateri - Ebrahim Afjei

On the effect of control parameter variations and PLL dynamics on low-order harmonics in single phase grid-connected inverters in the presence of grid impedance uncertainty

Seyed mohammad ebrahim Mirjebreili - Sadegh Mohsenzade

A High-Power Dual-Transformer-Based Dual Active Bridge Converter Suitable for Electric Vehicles

Milad Babalou - Nazanin Pourmoradi - Hossein Torkaman - Edris Pouresmaeil

بیشتر

ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 43.6.0